1.0mm cold rolled steel coil
Cold-rolled steel is a product that has been pickled and cold reduced after hot-rolling, to further reduce steel thickness while imparting specific mechanical properties, surface finish, gauge tolerance and strip shape.
The benefits of cold-rolled sheet are excellent performance in operations that require deep drawing and intricate bending and forming.
Cold Roll Full Hard is manufactured from hot rolled coils by pickling to remove the surface oxide, and cold reducing the steel through the Cold Mill to the desired thickness in one continuous operation. Full hard product has extremely low ductility and usually requires further processing.
Conventional cold roll is produced by further processing the full hard coils to develop the desired end use characteristics such as formability, surface texture, flatness, etc. The full hard coils are first batch annealed and then temper rolled for formability and surface texture, and in some cases, tension levelling for flatness.
email
enquire now
1. Uniform thickness:
Cold rolled sheet and coil are of uniform size and thickness, which can fully meet the requirements of high-precision public service.
2. Strip thickness:
The extremely thin strip that cannot be produced by hot rolling can be obtained, and the thickness can be less than 0.001 mm.
3. Superior quality:
The appearance quality of cold-rolled products is superior, and there are no defects such as pitting, pressed iron oxide scale and so on that often appear in hot-rolled coils. In addition, the coils with different appearance roughness can be produced according to the user's request, so as to facilitate the processing of the next process.
4. High strength:
The coil length of cold rolled sheet has excellent mechanical and technological functions, high strength, low compliance limit, excellent deep drawing function, etc.
5. High production rate:
It can complete high-speed rolling and full continuous rolling with high yield.
JIS G3141 SPCC Cold Rolled Coil
| C | Mn | P | S |
| ≤0.15 | ≤0.60 | ≤0.100 | ≤0.050 |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | |
| 140~280 | ≧270 | 0.25-2.5mm | ≥2.5mm |
| ≧34 | ≧34 | ||
JIS G3141 SPCD Cold Rolled Coil
| C | Mn | P | S |
| ≤0.12 | ≤0.50 | ≤0.04 | ≤0.040 |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | |
| 240 | ≧270 | 0.25-2.5mm | ≥2.5mm |
| 30-40 | ≧41 | ||
JIS G3141 SPCE Cold Rolled Coil
| C | Mn | P | S |
| ≤0.15 | ≤0.45 | ≤0.030 | ≤0.030 |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | |
| 220 | ≧270 | 0.25-2.5mm | ≥2.5mm |
| 32-42 | ≧43 | ||
JIS G3141 SPCF Cold Rolled Coil
| C | Mn | P | S |
| ≤0.08 | ≤0.45 | ≤0.030 | ≤0.030 |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | |
| ≤220 | ≥270 | 0.25-2.5mm | ≥2.5mm |
| ≧40 | ≧45 | ||
JIS G3141 SPCG Cold Rolled Coil
| C | Mn | P | S |
| ≤0.02 | ≤0.25 | ≤0.020 | ≤0.020 |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | |
| ≤210 | ≧270 | 0.25-2.5mm | ≥2.5mm |
| ≧40 | ≧45 | ||
EN 10130-DC01 Cold Rolled Coil
| C | P | S | Mn | Ti |
| ≤0.12 | ≤0.045 | ≤0.100 | ≤0.60 | - |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
| 140-280 | 270-410 | ≥28 | ||
EN 10130-DC03 Cold Rolled Coil
| C | P | S | Mn | Ti |
| ≤0.10 | ≤0.035 | ≤0.035 | ≤0.45 | - |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
| 140-240 | 270-370 | ≥38 | ||
EN 10130-DC04 Cold Rolled Coil
| C | P | S | Mn | Ti |
| ≤0.08 | ≤0.030 | ≤0.030 | ≤0.40 | - |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
| 140-210 | 270-350 | ≥38 | ||
EN 10130-DC05 Cold Rolled Coil
| C | P | S | Mn | Ti |
| ≤0.06 | ≤0.025 | ≤0.0250 | ≤0.35 | - |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
| 140-180 | 270-330 | ≥40 | ||
EN 10130-DC06 Cold Rolled Coil
| C | P | S | Mn | Ti |
| ≤0.020 | ≤0.020 | ≤0.020 | ≤0.25 | 0.3 |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
| 120-170 | 270-330 | ≥41 | ||
EN 10130-DC07 Cold Rolled Coil
| C | P | S | Mn | Ti |
| ≤0.010 | ≤0.020 | ≤0.020 | ≤0.20 | 0.2 |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
| 100-150 | 250-310 | ≥44 | ||
Commodity | Cold rolled Steel |
Grade | Q195,Q215,Q235,08AL,SPCC,SPCD,SPCE,SPCEN,ST12,ST13,ST14,ST15,ST16,DC01, |
Standard | ISO,JIS,ASTM,AS EN |
Mechnical | Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality |
Surface treatment | Chromated and oiled, and ant-ifinger |
Hardness | Softy, half hard ,hard quality |
Thickness | 0.12-6.0mm |
Width | 600-1500mm |
Coil weight | 3-8MT/Coil or as your request |
MOQ | 5MT |
Packaging | Export standard, seaworthy |
ID | 508mm or 610mm |
Trade Term | FOB, CFR, CIF |
Transport Type | Container, bulk and train |
Loading port | Tianjin, Qingdao,Shanghai |
Payment terms | T/T, L/C at sight,West Union,D/P,D/A,Paypal |
Delivery time | 15-35 days after confirmed order |
Shandong Kuaima Steel Co., Ltd. has advanced special smelting, investment casting, pipe making and other production equipment. The company has 15 advanced production lines, which can independently produce hot/cold rolled steel, galvalume steel, galvanized steel, prepainted steel and stainless steel coils, strips, plates, plates, pipes, bars and other products. The standing inventory is more than 450,000 tons to meet the customer's demand for delivery time.
| stainless steel 304 coil prices | stainless steel 409 sheet plates coils |
| stainless steel 316l coils | stainless steel 409l coils |
| stainless steel 409 coils manufacturer | 301 stainless steel coils supplier |
| china 316 stainless steel coil | 304 hot rolled stainless steel coil |
| china 316l stainless steel coils | 430 stainless steel coil factory |
| china 430 stainless steel coil | china stainless steel sheet coil |
| china cold rolled stainless steel coil | china stainless steel strip coil |
| 200 series stainless steel coil | 200 stainless steel coil |
We have professional testing equipment. We have our own testing center laboratory to guarantee the quality of our products.
thickness
width
coating quality
chromatic aberration
paint
thickness
hardness
luster
tensile strength
Yield Strength
We are a world-renowned Cold rolled steel coil and sheet exporter, Qatar, Ireland, Portugal,Gambia, Thailand, Ukraine, United Kingdom, Netherlands, South Africa, Spain, Turkey, Italy, Libya, Ro-Fanaticism, Puerto Rico, Azerbaijan, United Arab Emirates, Pakistan, Philippines, Ghana, Slovakia, Germany,Saudi Arabia, Afghanistan, China, Bolivia, Switzerland, Bangladesh, Taiwan, Oman, Egypt, Greece,Norway, Singapore, Bulgaria, Estonia, Belgium, Yemen, Hong Kong, Ecuador, Sri Lanka, Nepal, Belarus,Finland, Gabon, Iran, Canada, Argentina, Lebanon. other countries
Speak to a Steel Expert
Hi! I want to help you! What type of support do you need?
Liaocheng Economic and Technological Development Zone, Shandong Province, China
: Echo@kuaimasteel.com
: +86-18365977887
English
home 
