News
Carbon Steel Cold Rolled Tube
304 Stainless Steel versus 409 Stainless Steel

304 is an austenitic stainless steel high in chromium and nickel with very high corrosion resistance. It is one of the most commonly produced and used stainless steel grades. 409 is a ferritic stainless steel with less chromium and very little nickel. It less expensive to produce than 304, but also provides less corrosion resistance.

2023-02-16
What Is the Difference Between Tubes, Pipes and Hoses?

Tubes, pipes, and hoses are easy to confuse. And for understandable reasons. After all, they all carry material from point A to point B. Is there really a difference?

2023-02-16
16 2023.02
What Is the Difference Between Tubes, Pipes and Hoses? Tubes, pipes, and hoses are easy to confuse. And for understandable reasons. After all, they all carry material from point A to point B. Is there really a difference?
16 2023.02
304 Stainless Steel versus 409 Stainless Steel 304 is an austenitic stainless steel high in chromium and nickel with very high corrosion resistance. It is one of the most commonly produced and used stainless steel grades. 409 is a ferritic stainless steel with less chromium and very little nickel. It less expensive to produce than 304, but also provides less corrosion resistance.
14 2023.02
How are Stainless Steel Spiral Duct made? You can make stainless steel spiral ducts by going through the following steps: First you need to prepare the materials that you need to make the stainless steel spiral duct. In this case, you will prepare stainless steel 304 or 316 depending on the grade you need.
14 2023.02
Common Defects of Spiral Welded Pipes The main cause of the bubbles in the center of the weld bead is hydrogen is concealed within the weld metal as bubbles. Thus, to eliminate this defect, remove the wire and weld the rust, oil, water, moisture, and other things, and then fully dry the flux to remove moisture. Furthermore, a higher current slows the solidification rate of liquid metal, limiting welding speed.
14 2023.02
Advantages of Spiral Welded Pipes Steel pipes of the same width can be utilized to make steel pipes of different diameters, especially when using narrow strip steel to make big-diameter steel pipes. Advertisements
14 2023.02
Spiral Welded Pipe vs Longitudinal As the name suggests, the manufacturing processes of spiral welded pipe and longitudinal welded pipe are distinctly different. While Spiral-weld pipes are rolled and welded according to a preferred helical angle, the longitudinal welded pipes are created by bending and forming metal, and finally welded together down the length of the pipe to create a straight, longitudinal seam.
14 2023.02
The Spiral Welded Pipe Manufacturing Process Steel strip coil, welding wire, and flux are the raw ingredients. Before being used, it must pass stringent physical and chemical tests.
10 2023.02
How to Measure Perforated Sheet A perforated sheet is a metal sheet that’s punched or cut to produce a pattern of holes, slots or shapes for practical or aesthetic purposes. It’s also known as “perforated metal.” This type of metal sheet includes decorative hole patterns such as circles, squares, triangles, diamonds, hex, slots, bars and so forth. By combining shapes, it is possible to create more complex designs.
10 2023.02
Difference between Precision Steel Pipe and Seamless Steel Pipe Precision seamless steel pipe is a cold drawn or hot-rolled after treatment of a high-precision steel pipe. As the precision seamless steel pipe inside and outside the wall of non-oxidized layer of precision seamless steel pipe
31 2023.01
Cleaning Stainless Steel Protect stainless steel from rust using proven cleaning methods and passivating treatments
31 2023.01
Does Stainless Steel Rust? Stainless steel is armed with built-in corrosion resistance but it can and will rust in certain conditions—although not as quickly or severely as conventional steels. Stainless steels corrode when exposed to damaging chemicals, saline, grease, moisture, or heat for prolonged periods of time.
13 2023.01
Cold galvanized Angle steel Cold galvanizing process is used to protect the metal from corrosion. For this purpose, the coating of zinc filler is used, which is coated on the protected surface by any coating method.
07 2023.01
What distinction do square steel and channel steel have Square steel: is solid, bar. Different from square pipe, hollow, belongs to pipe. Steel: Steel ingot, billet or Steel is made by pressure processing into the desired shape
1 2 3
Get Free Quote
close button
avatar

Hi! I want to help you! What type of support do you need?