Galvanized steel wire is made of high-quality low-carbon steel as raw material, and is completed through drawing, galvanizing and other processing procedures. After forming, the galvanized steel wire will be coated with a layer of anti-corrosion material on the surface. , strong anti-corrosion ability, strong galvanized layer and other characteristics, the products are widely used in construction, highway fence, flower tie, net weaving and other industries; among them, the characteristics of the steel wire for building binding are good flexibility and not easy to break, which is the most ideal for the construction industry. One of the binding wires, mainly using low-zinc cold-plated steel wire. The handicraft steel wire is specially processed with a single wire, without breakage, and the amount of zinc applied is even and bright.
Hot Rolled Zinc Galvanized Steel Sheet Zinc Coated Steel Plate
Hot-dip galvanizing is the reaction of molten metal with an iron substrate to produce an alloy layer, thereby combining the substrate and the plating layer. Hot-dip galvanizing is to pickle iron and steel parts first. In order to remove iron oxide on the surface of iron and steel parts, after pickling, it is cleaned in an ammonium chloride or zinc chloride aqueous solution or a mixed solution of ammonium chloride and zinc chloride.And then sent to the hot-dip plating bath. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life.
Cold Dip GI Wire Zinc coated Cold Dip GI Wire is highly resistant to Moisture and mechanical damage (than other surface coatings) / and have a very bright and smooth surface finish etc.
Galvanized Steel Wire
Q195-Q235,Q235,SAE 1008-1018 45#,50#,55#,60#,70#
DIN GB ISO JIS BA ANSI
L/C T/T (30%DEPOSIT)
Place of origin
Hot SALES SGCC z140 zink galvanized steel 3 mm GI plain sheet
4)Zinc coating: 40-600g/m2
01.Anticorrosive:13 years in heavy industrial areas,50 years in the ocean,104 years in the suburbs and 30 years in cities.
02.Cheap:The cost of hot-dip galvanizing is lower than that of other coatings.
03.Reliable:The zinc coating is metallurgically bonded to the steel and forms part of the steel surface,so the coating is more durable.
04.Strong toughness:The galvanized layer forms a special metallurgical structure that can withstand mechanical damage during transportation and use.
05.Comprehensive protection:Every part of the plated piece can be galvanized,and is fully protected even in depressions,sharp corners,and hidden places.
06.Save time and energy:Galvanizing process is faster than other coating methods.
Hot Dipped Galvanised Wire – Why To Use it
Let’s first understand what is electro-galvanised wire:
Electro Galvanization is a process where a thin layer is zinc is electrically and chemically bonded to the steel wire in order to give it a coating.
During the Electro Galvanization process, Steel wires are immersed in saline bath. Zinc acts the anode and Steel Wire acts as cathode and electricity is used to move electrons from anode to cathode. And the wire gets a thin layer of zinc which thereby forms a preventive layer.
When the process is complete, the finished coating is smooth, drip-free, and shiny—making it ideal for architectural applications or other applications where its aesthetic characteristics would be of value. However, once it’s exposed to the elements, the finish may deteriorate in a small amount of time.
How is Hot Dipped Galvanised Wire – Hot Dipped (GI) Wire made?
In Hot Dipped Galvanizing process, single uncoated steel wire is passed through molten zinc bath. The wires are passed through molten zinc after going through a rigorous 7-step caustic cleaning process. The cleaning process ensures better adhesion and bonding. The wire are then cooled and a coating of zinc is formed.
Hot dip galvanizing provides much better corrosion resistance than electro galvanization because the zinc coating is typically 5 to 10 times thicker. For outdoor or caustic applications where corrosion-resistance is required, hot dip galvanized wire is the clear choice.
Advantages of using galvanized wire
Softness of wire
Smoothness make the appearance look better
Uniform coating increases the product life
Perfect G.I wire ensures double life than any other ordinary galvanized wire available in the market.
Saving of nearly 10% to customers due to the correct size.
Appropriate coil formation increases productivity.
Galvanized wire is divided into hot galvanized wire and cold galvanized wire (electric galvanized wire) :
Hot dip galvanizing is in hot melt zinc liquid dip plating, production speed, thick but uneven coating, the market allows the lowest thickness of 45 microns, up to 300 microns above. It is dark in color, consumes more zinc metal, forms infiltration layer with base metal, and has good corrosion resistance. Hot dip galvanizing can be maintained for decades in outdoor environment.
Cold galvanizing (electric galvanizing) is in the electroplating tank through the current unidirectional zinc plating on the metal surface, the production speed is slow, the coating is uniform, the thickness is thin, usually only 3-15 microns, bright appearance, poor corrosion resistance, generally a few months will rust.
Relative hot dip galvanizing, electric galvanizing production cost is lower.
Cold galvanized and hot galvanized difference:
The difference between cold galvanized and hot galvanized is the amount of zinc is different, you can identify them from the color, cold galvanized color shiny silver with yellow. Hot dip galvanized shiny white.
Q:What is your terms of payment?
A:We usually accept T/T in advance, L/C for large sum.If you prefer other payments terms, please discuss.
Q:What is the terms of delivery?
A:EXW, FOB, CIF
Q:What is the terms of packing?
A:Generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirements.
Q:What is your delivery time?
A:For products in stock, we can ship it within 7 days after receiving the deposit.For custom order, production time is 15-30
workdays after received the deposit.
Q:Could you produce according to the samples?
A:Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.
Q:How can I get the price of needed product?
A:It's the best way if you can send us the material, size and surface, so we can produce for u to check the quality.If you
still have any confusion, just contact us, we would like to be helpful.