Kuwait is a country of petroleum resources with abundant, oil factory also is very broad, respectively, the oil plant are mainly used for refining oil and oil processing.

Find out more

Project Introduction This project was served for a complete oil well exploration which went through three phases. Drill pipes were used to conduct the force to the drill bit. Drilling with drill pipe is the first phase of every wellbore.The outer tubes are casing tubes. Casing lines the wellbore and protects the layers of soil and above all the groundwater from being contaminated by the drilling mud and/or frac fluids. It also stabilizes the wellbore, casing must be able to withstand espec

Find out more

Pipes And Fittings for Germany's leading oil and gas producers Technical Difficulties:Drilling depth needs to be measured to design different sizes to save drilling rig time and improve installation speed Technical Solution: Designed in three different sizes, at 1200 meters the 16-inch rope is set at a measured depth of 1,120 meters, while the 13 3/8-inch rope is set at a measured depth of 3,495 meters. To run faster and save rig time, 13 3/8” pipe runs in brackets (double), which increases inst

Find out more

Description Of Pipeline Engineering Materials Welded Line Pipe, Welded LSAW, Weld Method Longitudinal, Material Carbon Steel, 24" OD, 171.29 lb/ft Nominal Weight, 0.688" Wall Thickness, Standard and Grade API 5L X60, End Design Beveled, External Coating, Special Painted EM-18-00/03, nominal length 40 feet (+/- 2 feet), product specification level PSL1.

Find out more

The roles of the project is for a natural gas engineering between Romania and Bulgaria, the pipe need to pass through Plains, hills,that is to say, the construction and operating is quite difficult.

Find out more

In order to meet the demand of domestic oil products, ensure national energy security, kazakhstan’s state oil and gas company, Mr Kent, pavlodar, mu three oil refineries began a massive renovation and modernisation

Find out more